Are you tired of dealing with tangled hoses in your garden? Say goodbye to those frustrations! In this step-by-step guide, I’ll share the simple and efficient process of installing the Gardena hose reel on a post in your garden. With this handy reel, you’ll have a neat and organized watering solution at your fingertips, making gardening a breeze. Let’s dive in and transform your watering routine!
Step 1: Selecting Location for Installation
When it comes to installing your hose reel, choosing the perfect location is key. With the ability to pivot and reach up to 100 ft in either direction, you’ll want to find a spot that offers maximum convenience and accessibility.
Remember to select an area away from electrical, gas, and water lines for safety purposes. As a friendly reminder, it’s best to call 811 before you start digging to ensure there are no underground utility lines in your chosen location.
Section 2: Gathering the Supplies & Tools
Here’s a comprehensive list of essential supplies and tools you’ll need to bring your vision to life:
- Gardena Wall Mounted Retractable Reel Reel (100 Foot)
- 4x4x8 Pressure Treated Ground Contact Post
- Behr Premuim Cedar Naturaltone Semi-Transparent Waterproofing Exterior Wood Stain and Sealer
- Behr 6 in. Multi Painter for Edging and Trimming
- Sika 2 lb. PostFix Fence Post Mix
- Safety Glasses
- Palm Sander and/or Sand Paper
- Socket Wrench
- Post Digger or Auger
- Post Level and/or Level
Step 3: Prep the Post
If you’re looking to elevate your 4x4x8 post, consider giving it a light sanding with a fine grit sandpaper. This will do wonders in smoothing out any rough spots or post markings. Don’t forget to prioritize safety by wearing protective gear such as safety glasses and a mask during the sanding process.
Once your post is smooth, it’s time to add a touch of elegance with two coats of stain. My personal favorite is the Behr Premium Semi-Transparent Waterproofing Exterior Wood Stain and Sealer in the captivating Cedar Naturaltone shade. To achieve that picture-perfect finish, I highly recommend using the Behr 6 in. Multi Painter. Its efficient design ensures flawless and evenly coated results every single time.
Step 4: Dig the Post Hole
When it comes to digging the post hole, you have a couple of options at your disposal. For a manual approach, a trusty hole digger will do the job, giving you control and precision. On the other hand, if you’re like me and enjoy investing in time-saving tools, an auger becomes your best friend for outdoor projects.
Whichever method you choose, it’s crucial to ensure the proper depth and stability of the hole, aiming for a minimum depth of 2 feet. This ensures a secure foundation for your post and sets the stage for a successful installation.
Step 5: Set the Post
Now comes the exciting part – placing the post in the hole and ensuring it stands plumb. Take advantage of tools like a post level or a long level to guarantee its perfect alignment.
Once that’s done, it’s time to unleash the power of the Sika PostFix. Simply roll the bag of the two part solution to break the center seal and then shake it vigorously for 15 seconds. Without hesitation, grab your scissors and cut open the bag, pouring the solution into the post hole. You’ll have a few seconds to make any adjustments before the magic happens. Within 3 minutes, the solution transforms into a sturdy support, ready to hold its ground. After a patient two-hour wait, you’re all set to proceed with the exciting hose reel installation.
Section 6: Install the Hose Reel
It’s time to determine the optimal height for your hose reel placement. Personally, I went with the height of my hip for convenience and ease of use. Once you’ve decided on the perfect height, mark the mount hole on the post.
Then, grab your trusty drill and create pilot holes. This step is essential to prevent any unwanted post cracks. With the pilot holes ready, it’s time to add your mounting hardware and secure it in place using a socket wrench.
Once everything is securely in place, place your hose reel on top of the mount, ensuring it sits snugly and ready for action. Get ready to enjoy the convenience and efficiency of your newly installed hose reel.
Step 7: Add Finishing Touches
Let’s put the final touches on our hose reel installation for a polished and functional setup. Begin by attaching your water source hose to the reel water input. Ensure a secure connection, so you can enjoy a steady flow of water without any leaks. You will also add your hose nozzle on the front of the reel.
Lastly, cover the post base with dirt, ensuring it blends seamlessly with the surrounding garden. This not only provides stability but also adds a clean and finished look to your installation.
Congratulations! You’ve successfully installed the Gardena hose reel, paving the way for a hassle-free and efficient watering experience in your garden. Now it’s time to sit back, relax, and reap the benefits of your hard work. Get ready to enjoy effortless watering and a well-maintained garden throughout the seasons. Happy gardening!
Please note: This blog post contains affiliate links, which means I may receive a small commission if you purchase through my link, at no additional cost to you. Please read my full disclosure policy for more information.